TECHNICAL CENTER

If you are interested in the latest trends in the areas of applied electronics, the development of optical systems, advanced design of plastic parts or you are a technician with a wide range, you are in the right place.

Who are we looking for?

Would you like to develop new headlamps with us and push the boundaries of technical solutions in the area of optics, electronics and design engineering? Supervise the quality of the products or lead project teams even in dealing with customers or participate in planing processes, where 3D data is melted into the tangible product? We are offering you an interesting job in a global team of our top development center.

List of job positions:

Quality engineer (vývoj v elektronice)
Branch: Elektrotechnika a energetika, Kvalita a kontrola jakosti, Technika a vývoj
Locality: Mohelnice
Functional Safety Engineer (Ostrava)
Branch: Elektrotechnika a energetika, Kvalita a kontrola jakosti, Technika a vývoj
Locality: Ostrava-Pustkovec
Functional Safety Engineer (Mohelnice)
Branch: Elektrotechnika a energetika, Kvalita a kontrola jakosti, Technika a vývoj
Locality: Mohelnice
PCB Layouter (Ostrava)
Branch: Elektrotechnika a energetika, IS/IT: Správa systémů a HW, Technika a vývoj
Locality: Ostrava-Pustkovec
PCB Layouter (Mohelnice)
Branch: Elektrotechnika a energetika, IS/IT: Správa systémů a HW, Technika a vývoj
Locality: Mohelnice
Electronic HW Developer (Ostrava)
Branch: Elektrotechnika a energetika, IS/IT: Správa systémů a HW, Technika a vývoj
Locality: Ostrava-Pustkovec
Electronic HW Developer (Mohelnice)
Branch: Elektrotechnika a energetika, IS/IT: Správa systémů a HW, Technika a vývoj
Locality: Mohelnice
Electronic SW Tester (Mohelnice)
Branch: Elektrotechnika a energetika, IS/IT: Vývoj aplikací a systémů, Technika a vývoj
Locality: Mohelnice
Optický inženýr / Koordinátor projektů
Branch: Strojírenství, Technika a vývoj, Věda a výzkum
Locality: Mohelnice
Systémový inženýr - elektronika (Lead Electronic Engineer)
Branch: Elektrotechnika a energetika, Technika a vývoj, Věda a výzkum
Locality: Mohelnice
Programátor řídících systémů (PLC)
Branch: Elektrotechnika a energetika, Technika a vývoj, Výroba a průmysl
Locality: Mohelnice
Project management consultant
Branch: Ekonomika a podnikové finance, IS/IT: Konzultace, analýzy a projektové řízení, Technika a vývoj
Locality: Mohelnice
Optický inženýr / Koordinátor projektů
Branch: Strojírenství, Technika a vývoj, Věda a výzkum
Locality: Ostrava-Pustkovec

Did you not choose? Try a different category:

Or send us your resume.

TECHNICAL CENTER IN MOHELNICE

Since its foundation in 1899, HELLA has brought a wide range of innovative and high-tech solutions to the market, from the first acetylene lamps in 1908 and the first headlamps with asymmetric light distribution in 1957, through the historically first mass produced full LED headlamps in 2008 to Matrix headlamps, introduced in 2013.

The story of the development center in Mohelnice began in 1995. The first headlamps for Skoda Felicia originated here. And were followed by other, more complex products: tail lamps, halogen and xenon lamps, headlights with adaptive light level (AFS / ACOL) and in recent years premium full- LED headlights for Audi , Daimler BMW etc. are born in our design offices and laboratories.

If you are interested in the latest trends in the areas of applied electronics, the development of optical systems, advanced design of plastic parts or you are a technician with a wide range, you are in the right place.

OPTICS

Everything starts here. The optical concept is the alfa and omega of our products.

X

Primary design, calculations, the construction of samples, verification and measuring in an optical laboratory. In modern lighting laboratories, teams of specialists design innovative optoelectronic systems for cars of prestigious brands, from conventional halogen solutions through xenon and bi-xenon modules to the application of the latest types of LED.

ELECTRONICS

Sophisticated products will not work without bold solutions.

X

In the automotive industry, electronically controlled light sources offer bigger possibilities in the development of style, brand differentiation, highlighting the model and mainly increasing driving safety.

The electronics department in Mohelnice/Ostrava concentrates on developing control circuits of LED headlamps and rear lamps. In the simplest case, those are the PCBs with LED controlled by an external control unit. The discrete solution of constant current source or a DC/DC directly on the PCB is more complicated. We also develop or closely collaborate on the development of control units of the latest generation in light distribution systems (matrix beam , animated functions, laser... ), which can now be generally characterized as DC/DC multi-channel converters with 16/32bit microcontroller, CAN/LIN communications...

DESIGN ENGINEERING

The construction of plastic parts has been one of our key competencies in the development of automotive lighting.

X

Whether it is the most modern headlamps, rear lamps, single function lamps or interior lighting. With the help of the most up-to-date CAD/CAM tools, the designs of the stylists are transformed into detailed numeric models, which are used for testing the conditions of real operation, critical load, the conditions during molding, the influence of temperature and climate.

Thanks to building the prototypes using the latest 3D printing technologies and continuous verification of the design, optimization can be flexibly proposed and can directly affect the final appearance of the cars that come on the market in a few years. And that is not at all everything.

PROTOTYPING

That is a team of professionals that supplies headlamp prototypes. It ensures building the samples from the designs, through production (3D printing, tooling), polishing,

X

metal coating to the final assembly and testing. A fast growing group are the electronicians in the prototyping, who focus on the production of printed circuits, cables and special testers. The production flow is ensured by the technicians who order material.

In our company, those who have skilled hands, the courage to find new solutions and think of new procedures of production will find assertion.

TEST LABORATORIES

Everything that is devised in the development of optics, electronics and design engineerig needs to be tried, tested, analyzed

X

and measured and, after optimizing the individual parts, a final testing must be performed according to the customer’s and international specifications and regulations.

Our laboratories have the latest equipment for the electronic, vibration, climatic, chemical and material testing including touch and optical 3D measurement and areas co-operate with HELLA laboratories worldwide in these areas.

Achieving the satisfactory test results is then "the green light" to begin serial production.

QUALITY

The modern development and production can not do without advanced methods of monitoring and controlling quality.

X

Intensive contact with the product from the very beginning, the option to influence the product design phase, direct co-operation with automotive companies, coordination of the test phase with laboratories worldwide, participation in internal and external audits - these are all part of the development of a new product.

The application and enforcement of the most up-to date principles of quality are our everyday reality.

PROJECT MANAGEMENT

Each new lamp presents new adventures, new challenges, unexpected obstacles and the joy of victory.

X

Development projects are unique as well as the teams that execute them. Project management coordinates the different roles in development teams, provides support to the extensive network of HELLA companies, manages the budget and oversees the project schedule.

Project management represents the customer relations, negotiates the eventual changes in the assignment, defines the work objectives and reports the project status.

PROCESS PLANNING

The manufacturing process will not work without specialists who give shape to physical parts and ensure the transition of 3D data into real products.

X

The technical feasibility and manufacturability are, from the very beginning of the construction of our products, the basic parameter that influences the final appearance and functionality.

Precise injection press tools, the coordination of suppliers, tuning the first pieces, ramp up production - that is what we are dealing with here.

Custom assembly lines and fixtures

Self-sufficiency and flexibility, that is a brief description of the specific technical center department in Mohelnice.

X

Based on data and the information from the development team, assembly lines for Hella manufacturing plants worldwide originate here. Design engineers, electronicians, programmers and mechanics may apply their experience here. Thanks to the complexity of our work, there is something for virtually every technician.

LAMBORGHINI HURACAN

The first full LED headlamp developed by Hella Mohelnice, where all the optical functions are provided by LED technology. The main optical functions are composed of projection modules, that is VarioLED PreField module and LED module. Various light distribution according to the requirements (motorway, city, countryside, etc. ) is ensured by the mechanical turning of a cylinder, which cuts the light output. The precise turning of the cylinder is ensured by using the CIPOS sensor.

Signal optical functions (day, outline and course change indicator) consist of 22 optical elements divided into 4 individual parts. The styling is dominated by one main frame, onto which partially transparent pieces of glass are welded. These ensure greater homogeneity from various viewing angles. Two decorative frames in the module area coated with “black chrome” give the headlamp a technical character.

HELLA concern – HIGHLIGHT

What is the selection procedure?

Our selection process is usually divided into multiple rounds. In the first round there is interview with the future leaders about all aspects of the work. That's usually followed by another round where the candidates have a great chance to show their knowledge, skills and become familiar with the atmosphere in the team working environment, but also to recognize some of its members.

Candidate pre-selection
The first meeting with candidates suitable for the position, interviews and other selection methods
1st round of the selection procedure
Selecting the most suitable candidate
Another meeting, an invitation to discuss specific terms
2nd round of the selection procedure
Presenting an employment offer
Offer acceptation, onboarding preparation
(in case of rejection will contact the next best candidates)
Closing the selection procedure, notifying all the candidates who did not succeed